Web Analytics

Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision

New sale online Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision You can order Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision after check, compare the costs and check day for shipping. Some people are are interested Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision in the cheap price. While the item could be priced similarly at different shops.

Content:

Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision.

$101.99 - $184.99
The AR-15 ATLAS S-ONE M-LOK free-floating slim line handguards are machined from 6061-T6 aluminum, and have been designed with size and weight ...

Product Description

Not Your Average Handguard

The AR-15 ATLAS S-ONE M-LOK free-floating slim line handguards are machined from 6061-T6 aluminum, and have been designed with size and weight in mind, to provide a premium handguard solution for lightweight MSR builds. The handguards have a slim profile, but maintain the strength and stability shooters require, and have come to expect from Aero Precision handguards.

The AR-15 ATLAS S-ONE slim line handguards use the new Aero Taper Lock Attachment System (ATLAS), which is both functional and pleasing to look at. It uses two mirrored tapered locking nuts that allow for even clamping pressure to be distributed across a custom barrel nut with a turnbuckle screw.

  • Length – 7”, 12" and 15"
  • Available in Black and FDE
  • Front and rear picatinny rail
  • Reduced weight by eliminating center of top rail
  • Indexing grooves in 12 o’clock position for positive grip control
  • 1.3” I.D. – 1.5” O.D.

The AR-15 ATLAS S-ONE slim line handguards include all required mounting hardware.

P320/p250 Magazines Sig Sauer.

$37.99 - $51.99
Sig Sauer P250 and P320 factory replacement magazines are available in all the calibers and capacities that the pistols come in. Sometimes ...

Product Description

Sig Sauer P250 and P320 factory replacement magazines are available in all the calibers and capacities that the pistols come in. Sometimes the quickest way to solve a problem with feeding or cycling is to make sure you are using only original factory magazines in your Sig Sauer P250 and P320 pistol.

All Sig Sauer P250 and P320 factory replacement magazines have a hardened steel mag body with a durable satin black finish, plus a black polymer follower and removable base plate. Extended capacity P250 and P320 magazines have a longer base pad that protrudes below the grip of the pistol when seated in the magwell.


Big Book Catalog, Issue:68, Page:564
Big Book Catalog, Issue:68, Page:662

Ar-15 Super Dynamic Triggers Geissele Automatics Llc.

$237.99
The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived ...

Product Description

The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.


AR-15, Issue:11, Page:028
Big Book Catalog, Issue:71, Page:029

SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger andhammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.

Weapons Care System Pellets Vfg.

$6.99 - $79.99
Innovative and efficient system cleans rifle and handgun barrels with a minimum of effort and mess. Slip two felt pellets on the cleaning ...

Product Description

Absorbent Felt Pellets Quickly Scrub Barrels Clean

Innovative and efficient system cleans rifle and handgun barrels with a minimum of effort and mess. Slip two felt pellets on the cleaning rod adapter, apply your favorite solvent and push through the bore to rapidly scrub out dirt and fouling. Pellets fit snugly to easily follow the rifling for fast, efficient cleaning; as you withdraw the rod, the front pellet falls off while the rear pellet polishes the bore. Lets you apply oil, cleaning solvents, J-B® Bore Cleaner or Moly Bore Paste easily with minimal mess. Plain pellets are made from a highly absorbent, hardened felt; Super Intensive pellets also have interwoven brass fibers for even greater scrubbing action to quickly clean heavily fouled barrels. All require cleaning rod adapter.


1911, Issue:04, Page:058
Big Book Catalog, Issue:71, Page:337
SPECS: Felt, white. 3/8" (9.5mm) long. Adapter - Aluminum, 1¾" (4.4cm) long. 603 fits Parker Hale .270 and larger rods. 604 fits Parker Hale .22 - 6.5mm rods. 606 fits 7-32 tpi rods. 607 fits 8-32 tpi rods.

Titanium Nitride Neck Bushings Redding.

$33.99 - $40.99
Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness ...

Product Description

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size.

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.


Sinclair, Issue:1B, Page:043

1911 8rd 45acp Elite Tactical Magazines Wilson Combat.

$32.99 - $46.99
Wilson Combat applied 30 years of experience building high-performance 1911 magazines to develop this ultra-reliable magazine for combat, competition, or self-defense. Made ...

Product Description

Ultra-Reliable, Extra-Capacity & Smooth Feeding Of All The Rounds

Wilson Combat applied 30 years of experience building high-performance 1911 magazines to develop this ultra-reliable magazine for combat, competition, or self-defense. Made with state-of-the-art materials using the latest manufacturing technology, these single-stack magazines are built tough to keep running in unforgiving, real-world conditions. The body formed from extra-thick stainless steel, with the radius of each curve engineered to minimize stress points, virtually eliminates feed lip cracking and stress fatigue. Even the position of the witness slots toward the rear is designed to enhance structural integrity. A proprietary welding, deburring, and polishing process provides an unusually strong, super-smooth seam to ensure snag-free follower movement and easy insertion in the mag well. The non-tilt follower of self-lubricating polymer fully supports the ammo stack to prevent nose-dives, double feeds, and other hang-ups. The mag body design puts less tension on the spring than standard magazines, increasing spring life and making it easy to seat a fully loaded magazine with the slide closed. The polymer base pad adds minimal bulk yet ensures a firm purchase even when your hands are wet; removes easily for cleaning. Numbers 1 through 10 stamped on the bottom help you mark each of your magazines to track usage and performance. .45 ACP fits Gov’t Model; 8 round capacity; round-count numbers stamped on body next to witness holes. Available in natural Silver or Black Oxide finish in singles or in convenient, money-saving 3-Paks with or without a Michael’s of Oregon double mag pouch of rugged, high-impact Kydex® molded polymer. 

ETM MAX Magazines feature the MAX flatwire magazine springs. The heat-treated MAX flatwire construction never gets stressed or over-compressed like a conventional spring and is guaranteed tonever require replacement even after high round counts or daily, extreme duty use.

  • Maximum strength-up to 25% stronger than standard 1911 mag springs for superior reliability with defensive and +P loads and more positive slide lockback .
  • Maximum longevity MAX flatwire spring will never lose optimum feeding tension as long as you own the magazine -guaranteed! Extensively tested by the Wilson Combat Shooting Team and testfire crew.
  • Maximum corrosion resistance-heat treated stainless MAX spring won’t corrode in high humidity or marine environments-a leading cause of service pistol spring fatigue.


1911, Issue:11, Page:028
Big Book Catalog, Issue:71, Page:122
Sinclair, Issue:1A, Page:010
Sinclair, Issue:1A, Page:026

SPECS: 17-7 stainless steel, natural silver or black oxide, finish, with black polymer follower and base pad. Gov’t .45 ACP - 5" (12.7cm) OAL. 8-round capacity.

Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul.

$242.20
The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height ...

Product Description

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting.

  • Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)
  • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
  • Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height
  • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
  • Steel adjustment shafts finished with melonite for wear and corrosion resistance
  • All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing
  • Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod
  • Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible)

NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.


Big Book Catalog, Issue:71, Page:050

0 comments
post a comment