Web Analytics

Titanium Nitride Neck Bushings Redding

Reviews Titanium Nitride Neck Bushings Redding is best in online store. I will call in short name as Titanium Nitride Neck Bushings Redding For individuals who are looking for Titanium Nitride Neck Bushings Redding review. We've more details about Detail, Specification, Customer Reviews and Comparison Price. I would really like recommend that you check always the latest price before buying. To get a cheap price or good deal. Order Titanium Nitride Neck Bushings Redding from this point. Price is low as of today. Please check latest price.Lastly, I hope that this reviews relating to this Titanium Nitride Neck Bushings Redding is going to be useful. And hope I'm a part of helping you to get a full product. You will get a review and experience form here. I hope you will ensure and purchase considered one of ${Title} after check this out review. 

Content:

Titanium Nitride Neck Bushings Redding.

$33.99 - $40.99
Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness ...

Product Description

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size.

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.


Sinclair, Issue:1B, Page:043

0 comments
post a comment